Short Description
This shelf racking roll forming machine use to produce storage rack, from a coil to finished finished product only finished by one production line, the machine line has 3in1 equipment which has de-coiler for coil hold, leveling machine for making coil sheet flat, and then use servo feeder to feed sheet length to punching machine as PLC program setting, hydraulic punching machine or mechanical punching machine could be an option.
Working Flow
Main Parameter
Suitable Raw Material |
|
Material |
GI |
Thickness |
1.0-2.5mm |
Coil width |
238mm |
Yield Strength |
235Mpa |
Main Technical Parameters |
|
Quantity of forming rollers stations |
18-22stations |
Diameter of forming rollers shafts |
82mm |
Roll Forming Speed |
8-15m/min |
Production Speed |
4-6m/min |
Rollers material |
CR12 mould steel, with quenched treatment |
Cutter material |
CR12 mould steel, with quenched treatment |
Controlling system |
PLC and Converter |
Electric Power requirement |
Main motor power: 22kw |
|
Hydraulic unit motor power: 7.5kw |
Electric voltage |
According to customer’s requirement |
Machine Components
Hydraulic Decoiler | 1 Unit |
Leveling | 1 Unit |
Servo Feeding | 1 Unit |
Hydraulic Punching | 1 Unit |
Main Roll Forming Machine | 1 Unit |
Hydraulic Cutting | 1 Unit |
Hydraulic Station | 1 Unit |
Electrical Control System | 1 Unit |
Run out table | 1 Unit |
Machine Picture
Profile Drawing