Product Descriptions
Cut-to-length lines are used to cut the leveled metal strip into metal sheet and stack it. Depending on the need and productivity our cut-to-length lines are fitted with stop and go cut-to-length shears or flying cut-to-length shears and the appropriate stacking system.
Working Flow
Uncoiler—Coarse-pose—circle-shear—Loop—Fine-pose—Cutting—Output table
Product Parameters
1.Brand Name: | Dingbo |
2.Model: | DBCTL-4×1300 |
3.Condition: | New |
4.Certification: | ISO,SGS,CE |
5.Thickness (mm): | 0.5-4 |
6.Coil width(mm): |
500-1300 |
7.Producing Speed(m/min) |
0-50 |
8.Weight(t): |
15,20 |
9.Length of tolerance(mm) | ±0.5 |
Main Components
Name |
Quantity |
Coil car |
1 Set |
Decoiler |
1 Set |
Peeler entry table |
1 Set |
Mandrel Decoiler |
1 Set |
Side Guide |
1 Set |
Straightener |
1 Set |
Measuring table |
1 Set |
Hydraulic Shears |
1 Set |
Conveyor |
1 Set |
Pneumatic Stacker |
1 Set |
Unloading table |
1 Set |
PLC Control System |
1 Set |
Motor |
1 Set |
Hydraulic Unit |
1 Set |
Pictures
After Service
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling.
c.If there is any problem found of the machine, we will repair it for free in one year.
Advantages
1.Produce different purlin size without changing rollers or spacers.
2.No need changing cutter for different size.
3.Easy operation, low maintenance cost
4.Infinite sizing(any size within machine range),help to save material
5.Optional Punch hole at any position of purlin web side and flange side